SDM PROTECTIVE MICRO THIN FILM OVERLAY PF-2000

Description

There are many different terminals and pin pads installed today. All merchants have the same problem: how do they protect their customers who use these devices? Often the solution is to clean the keypad and the terminal screen after every use.  By doing this there is a danger of liquid damaging the electronics in the terminal or pin pad and making the device unusable. Micro Thin Film Overlay solves the problem for every terminal and pin pad in use today. Micro Thin Film Overlay is a simple to use micro thin film that adheres to the keypad and the screen and creates a barrier between the touchscreen or key pad and user’s finger. The overlay may be cleaned with a wipe or a spray without danger of damaging the terminal or the pin pad. Most importantly the overlay uses non residual glue. It will adhere securely to the device and when removed will not leave any residue. The Micro Thin Overlay maybe cleaned many times but when replacement is necessary the ease of application and minimal cost make replacement a breeze.

 Benefit to Retailer:

• Protect both your customers and your equipment with one product.

• May be stored by the terminal or kept at the counter. Universal fit – the film will fit most terminals, Pin Pads or touch screen terminals. When removed no residue is left on the device. The pliability and thinness of the film eliminates the chance of two keys being depressed by mistake.

• If you have an iWL or Move/5000 terminal and use the silicone cover supplied with the terminal. The micro thin film overlay will fit under the silicone cover for maximum protection. Silicone covers may also be purchased.

Simple to use:

• Peel the film from it’s protective layer. Easy to cut with scissors for a “custom” fit.

• Apply the adhesive side of the film to the screen and the keypad of your POS terminal.

• Your purchaser is protected from virus transmission by the micro thin film covering the areas of the terminal that may be touched. The terminal maybe cleaned after each use.

Specifications:

Clear polypropylene material.

• 6cm wide x 15.8 cm long.
• Film thickness 0.05mm. With backing 0.08mm.
• Printed instructions provided with each package.
• Customization available upon request.

This protector is designed to allow you to clean the keypad and the screen without damaging the sensitive electronics underneath. It also provides protection for your customers. If your terminal is a Vx520 please use the complete protector for any other terminals cut along the dotted line before peeling the protector from the backing paper.